Working on edx-platform as a developer

Tutor supports running in development with tutor dev commands. Developers frequently need to work on a fork of some repository. The question then becomes: how to make their changes available within the “openedx” Docker container?

For instance, when troubleshooting an issue in edx-platform, we would like to make some changes to a local fork of that repository, and then apply these changes immediately in the “lms” and the “cms” containers (but also “lms-worker”, “cms-worker”, etc.)

Similarly, when developing a custom XBlock, we would like to hot-reload any change we make to the XBlock source code within the containers.

Tutor provides a simple solution to these questions. In both cases, the solution takes the form of a tutor mounts add ... command.

Working on the “edx-platform” repository

Download the code from the upstream repository:

cd /my/workspace/edx-plaform
git clone https://github.com/openedx/edx-platform .

Check out the right version of the upstream repository. If you are working on the current “zebulon” release of Open edX, then you should checkout the corresponding branch:

# "zebulon" is an example. You should put the actual release name here.
# I.e: aspen, birch, cypress, etc.
git checkout open-release/zebulon.master

On the other hand, if you are working on the Tutor “nightly” branch then you should checkout the master branch:

git checkout master

Then, mount the edx-platform repository with Tutor:

tutor mounts add /my/workspace/edx-plaform

This command does a few “magical” things 🧙 behind the scenes:

  1. Mount the edx-platform repository in the image at build-time. This means that when you run tutor images build openedx, your custom repository will be used instead of the upstream. In particular, any change you’ve made to the installed requirements, static assets, etc. will be taken into account.

  2. Mount the edx-platform repository at run time. Thus, when you run tutor dev start, any change you make to the edx-platform repository will be hot-reloaded.

You can get a glimpse of how these auto-mounts work by running tutor mounts list. It should output something similar to the following:

$ tutor mounts list
- name: /home/data/regis/projets/overhang/repos/edx/edx-platform
build_mounts:
- image: openedx
    context: edx-platform
- image: openedx-dev
    context: edx-platform
compose_mounts:
- service: lms
    container_path: /openedx/edx-platform
- service: cms
    container_path: /openedx/edx-platform
- service: lms-worker
    container_path: /openedx/edx-platform
- service: cms-worker
    container_path: /openedx/edx-platform
- service: lms-job
    container_path: /openedx/edx-platform
- service: cms-job
    container_path: /openedx/edx-platform

Working on edx-platform Python dependencies

Quite often, developers don’t want to work on edx-platform directly, but on a dependency of edx-platform. For instance: an XBlock. This works the same way as above. Let’s take the example of the “edx-ora2” package, for open response assessments. First, clone the Python package:

cd /my/workspace/edx-ora2
git clone https://github.com/openedx/edx-ora2 .

Then, check out the right version of the package. This is the version that is indicated in the edx-platform/requirements/edx/base.txt. Be careful that the version that is currently in use in your version of edx-platform is not necessarily the head of the master branch:

git checkout <my-version-tag-or-branch>

Then, mount this repository:

tutor mounts add /my/workspace/edx-ora2

Verify that your repository is properly bind-mounted by running tutor mounts list:

$ tutor mounts list
- name: /my/workspace/edx-ora2
build_mounts:
- image: openedx
    context: mnt-edx-ora2
- image: openedx-dev
    context: mnt-edx-ora2
compose_mounts:
- service: lms
    container_path: /mnt/edx-ora2
- service: cms
    container_path: /mnt/edx-ora2
- service: lms-worker
    container_path: /mnt/edx-ora2
- service: cms-worker
    container_path: /mnt/edx-ora2
- service: lms-job
    container_path: /mnt/edx-ora2
- service: cms-job
    container_path: /mnt/edx-ora2

You should then re-build the “openedx” Docker image to pick up your changes:

tutor images build openedx-dev

Then, whenever you run tutor dev start, the “lms” and “cms” container should automatically hot-reload your changes.

To push your changes in production, you should do the same with tutor local and the “openedx” image:

tutor images build openedx
tutor local start -d

Debugging with breakpoints

To debug a local edx-platform repository, first, start development in detached mode (with -d), add a python breakpoint with breakpoint() anywhere in the code. Then, attach to the applicable service’s container by running start (without -d) followed by the service’s name:

# Start in detached mode:
tutor dev start -d

# Debugging LMS:
tutor dev start lms

# Or, debugging CMS:
tutor dev start cms

Running edx-platform unit tests

It’s possible to run the full set of unit tests that ship with edx-platform. To do so, run a shell in the LMS development container:

tutor dev run lms bash

Then, run unit tests with pytest commands:

# Run tests on common apps
unset DJANGO_SETTINGS_MODULE
unset SERVICE_VARIANT
export EDXAPP_TEST_MONGO_HOST=mongodb
pytest common
pytest openedx
pytest xmodule

# Run tests on LMS
export DJANGO_SETTINGS_MODULE=lms.envs.tutor.test
pytest lms

# Run tests on CMS
export DJANGO_SETTINGS_MODULE=cms.envs.tutor.test
pytest cms

Note

Getting all edx-platform unit tests to pass on Tutor is currently a work-in-progress. Some unit tests are still failing. If you manage to fix some of these, please report your findings in the Open edX forum.

What if my edx-platform package is not automatically bind-mounted?

It is quite possible that your package is not automatically recognized and bind-mounted by Tutor. Out of the box, Tutor defines a set of regular expressions: if your package name matches this regular expression, it will be automatically bind-mounted. But if it does not, you have to tell Tutor about it.

To do so, you will need to create a Tutor plugin that implements the tutor.hooks.Filters.MOUNTED_DIRECTORIES filter:

from tutor import hooks
hooks.Filters.MOUNTED_DIRECTORIES.add_item(("openedx", "my-package"))

After you implement and enable that plugin, tutor mounts list should display your directory among the bind-mounted directories.

Do I have to re-build the “openedx” Docker image after every change?

No, you don’t. Re-building the “openedx” Docker image may take a while, and you don’t want to run this command every time you make a change to your local repositories. Because your host directory is bind-mounted in the containers at runtime, your changes will be automatically applied to the container. If you run tutor dev commands, then your changes will be automatically picked up.

If you run tutor local commands (for instance: when debugging a production instance) then your changes will not be automatically picked up. In such a case you should manually restart the containers:

tutor local restart lms cms lms-worker cms-worker

Re-building the “openedx” image should only be necessary when you want to push your changes to a Docker registry, then pull them on a remote server.